BTP-PJS series of products are valet parking equipment. They are suitable for both commercial and residential parking purposes. It moves only vertically, so the users have to clear the ground level to get the higher level car down. It is hydraulic driven type that lifted directly by cylinders. The equipment can be used for both sedan & SUV.
1.Top quality processing
The BTP-PJS Series products are 100% cut by Laser and more than 60% welded by robot.
2.Dynamic locking device
We are offering the safest parking machine in the market, the equipment is built under the CE standard and there are more than 10 safety features to ensure our clients will always get protection. Especially, there are a range of locking tabs on the posts to protect cars from accident damage.
3.Fast and easy installation
With professional design and friendly package, it becomes simple on installation. What's more, detailed installation manual, drawing and video attached with products will help customers have easier installation work.
4.Sharing post feature
The posts could be shared when they are installed side by side, which can save cost, land space, and container space.
5.Professional packing & delivery
We have very professional packaging and logistic people to ensure our customer will get the product damage free , simple load & unload in time.
6.Hydraulic driving mode
Thanks to the hydraulic driving mode, our lift could have a faster lifting speed. Even though there is power failure, the upper car still can be retrieved by manually operating the solenoid valve.
7.Low usage cost
When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power pack .
Accurate inset structure is adopted to make steel plates jointed stronger so a larger loading can be supported.
2.Transparent oil tank
3.Oil drip tray (optional)
4.Galvanized cover plate
6.Rubber wheel protector (optional)
7.Key switch & emergency stop button
9.Front & Back footage
10.Rubber wheel protector (optional)
BTP-PJS series are a kind of valet parking, it means people need get the bottom car out first then can retrieve the top car if both two cars are parked
To Stop the power pack pumping ,when the platform reach the position,Height adjustable feature
1.Pressure Relief Valve(will be activated when the pressure inside of the cylinder reach a certain level)
2.Directional Valve 3.Solenoid Valve 4.Flow control valve
5.Transparent Oli Thank(Be able to see the oil level)
(3)Hot Galvanized Cover Plate
Anti-rust Non-slip design Leakage-proof design
1. 24V Control 2.Voltage Overload Protect 3.Fuse
(5)Mechanical lock hook
Lock the platform in the lock hole when,during the platform go up and down
(6)Full Range Mechanical Lock Block
1.Full range mechanical lock block start from 500mm of the bottom of the post until reach the lifting position
2.Each block is 70mm high and 80mm gap in between.
3.It will be activated when there is any failure of the hydraulic system, and hold the platform on the next locking position by the post.
(7)Accurate Inset Structure Achieved By Laser Cutting Machine
(8)Photocell limit Switch
Will stop the whole system when it blocked , Ensure the lower lever car will not be damaged by wrong operation
1.Self-restore key switch. 2.Emergency stop button